Ophthalmic Unit & Chair

• Can minimize the installation space.(Side table is optional upon the installation space)
• Easy to operate sliding table by electronic stop/release
• Selectable either right type or left type of side table with main body as a center
• Built in charger(Optional) for Welch Allyn, Neitz, Keeler, Heine(old model)
• All maker s slitlamp mountable
• Controllable chair and table up and down with footswitch(Optional)
• Additional power(12V, 1.5A) for Camera

• Table stroke : 500mm
• Height of table : Min 770mm, Max 940mm
• Height of chair : Min 505mm, Max 620mm
• Allowable weight on slide table : 30 Kg
• Allowable weight of chair : 130 Kg
• Maximum power consumption : 350 W

• Slitlamp power : DC7.5 or 12 V
• LED power for Fixation : DC5 ~ 7.5 V
• Charger spec. : DC3.5 ~ 3.75 V
• Camera power : DC 12 V, 1.5 A
• Weight of Unit : 166 3 Kg
• Weight of chair : 58 2 Kg

1. Turn the main switch ON/OFF. Hold down for 1 second.
2. Move the medical treatment table UP/DOWN.
3. Move the chair UP/DOWN.
   * movable UP/DOWN with footswitch
4. Turn the stand light ON/OFF.
   * Pushing down repeatedly enables to control the brightness (2 step).
5. When use in MANUAL mode, ROOM LIGHT can be turned ON/OFF manually.
6. When use in AUTO mode, ROOM LIGHT becomes OFF when the table reaches to the medical position and when the table returns to the original position, then the light becomes ON.
7. Control the brightness of the slit lamp.
8. It can charge the scope. Two charger become ON regardless of Main power switch. The pilot lamp becomes RED when the battery is fully discharged and becomes GREEN when it is fully charged.